EASYGrout mixes readily with water, forming a free-flowing, non-porous joint filler for use on interior and exterior horizontal surfaces. to give a highly flowable joint filling, and grouting mortar. Ideal for use on high traffic areas where a high early strength, hard wearing grout joint is needed.

Not suitable for use on vertical surfaces. Designed specifically for ceramic and porcelain tiles and is not recommended for use on natural stone. Natural stone and porous materials in particular will be at risk from permanent discolouration.

• Designed for ceramic and porcelain tiles for a fine, textured finish.
• A cementitious grout which is applied as a slurry unlike traditional floor tile grouts.
• Easy to use. Simply mix, pour, sweep, and rinse.
• Each tub contains 3 x 5kg bags for minimal waste.
• Provides coverage up to 20m2 (215ft), when using and average 20mm thickness 600x600mm exterior porcelain with a joint width of 5mm.
• Available in a range of colours and suitable for minimum joint depths of 12mm interior and 18mm exterior.